Month: October 2023

Major components are– – Ethanol, Paraffin, Silicon, Aluminium chloro hydrate, Bentone, LPG quote for burners for industrial chemical wastes therapy, 1 burning price need to be Average 30kgs/h 2 within chamber item need to be refractory concrete cement 3 it operates in three system diesel oil/ Gas or LPG 4 voltage must be 220V 5 …

The sludge shall be properly atomized by means of compressed air in the burner so as to ensure complete combustion of the sludge.     An air compressor complete with a receiver shall be included in the incinerator. Both compressor and receiver shall be mounted on the same skid as the incinerator.     The …

Primary Burning Chamber Waste Charging Door: Given with refractory cellular lining with securing gaskets Ash Eliminated Door: Supplied with refractory cellular lining with sealing gaskets Exterior Body MOC: Mild Steel, 5mm Main Chamber: Stainless-steel Running Temperature degree:800. ± 50 ◦ C. Insulation: Insulation Block. Burner Kind: Kanthal Al High Quality. Power Use: 75 KW (Initial …

1. Is your house time greater than 2 secs? 2. Is the primary as well as additional air preheated? 3. Could it be given as a constant system? 4. Exists a monitoring system for functional criterion? (temperature). 5. Exists an info logging system? 6. Does it offer control treatments to change waste feed, grate rate, …

Capacity    Not less than 500Kg/hr. Operation    24hr-7days/week continuous operation. Combustion chamber    2 combustion chamber. Temp.    First combustion chamber 800-1000 C. Secandry combustion chamber 1000-1200 C, with the possibility to be upgraded to 1400 C. Combustion Efficiency    99.99% Retention time    Of the flow gases not less than 2 Sec in the hot portion. Excess Oxygen concentration   …

Burning rate: 250 Kg/hr. It should be able to Operate not Less than 10 hours/day This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc… Design Specification: Types A, B, C, D, and E of medical waste “PYROLYTIC” combustion, by controlling the gasification of waste. The incinerator …

Solid waste to be incinerated     Cartons,  rags,  cotton  and  other  wastes  associated  with  generation  of  electricity loaded in the incinerator in bags. Loading capacity: At least 100 Kg / h     Start up fuel     Diesel Oil       2.3  Incinerator Supply     The incinerator shall be equipped with …

TECHNICAL INCINERATORS SPECS FOR 2 medical facilities INTRO All the incinerators to be supplied and installed must meet the Government of Kenya waste Management Regulation 2006 in particular 3rdschedule regulation (26, 47) pertaining classification, standards, criteria, and procedure for installing/operating incinerators as authored by the National Environmental Management and Coordination (waste management) regulation 2006, legal …

1) Policy – – – – Incinerator: It is developed to sanitize medical waste, lower its amount, and make its parts unrecognizable all in one completely confined as well as automated system. 2) Waste Disposal Plan a)Classification The contaminated waste is filled up right into the leading stainless-steel chamber where a tough shredder reduces the waste into …

“PYROLYTIC” burning, by managing the gasification of waste The incinerator producer need to remain clear of the launch of black smoke along with excellent dirt, during the loadings. It will certainly be able to lower the quantity of wastes by 98%. It shall have the capability to hold discharge in the second shed with gas …

The incinerator shall also be equipped with special loading devices and mechanisms that allow safe incineration of solid waste simultaneously with liquid sludge. Loading of solid waste may be achieved through bags.   All intermediate piping, bellows and other fittings for connection between the tanks , burner, compressor and other equipment supplied on the skid …

The incinerator plant shall include a control board for its treatment. On the control panel we will have an aesthetic display of the chamber temperature level levels. This aesthetic screen needs to maintain an eye and handle on the burner in addition to his performance. Capacity of destruction in weight will be 60 Kg/h. It …

1    Basic Plant Design    An approved plant must have four distinct sections that demonstrate three principles of Turbulence, Residence Time and Temperature are inbuilt in the plant design .The regulated sections may include but not limited to: Overall plant layout. Feed chamber/ charging Primary Combustion Chamber. Secondary Combustion Chamber. Particulate Scrubbers Acid Gas Scrubbers The …

The panel shall comprise of a compartment for the connection of power and control cables. Passage for power cables and control cables shall be made by the bottom part of the switchboard.         The drawer shall be locked in the isolated position by padlocks.   1.Two systems are required to be installed …

Stack size shall be in accordance with the manufacturer’s recommendations. Stacks shall be the forced-air type and   completely self-supporting and unattached to nearby structures. As a minimum, stack heights shall minimize   downwash of stack emissions due to aerodynamic influences from nearby structures and be calculated in accordance   with DoD 4715.05-G, Overseas Environmental …

the following containerized incinerators. (Kitchen and accommodation and grey water and black water plant removing waste) we need incinerator is each function separate are all in one incinerator we need informed. Plant we installing for our accommodation barge used in an offshore marine construction project. 200 People would be accommodated onboard. WASTE INCINERATORS RECOMMENDATIONS china …