Incinerator
Basic Info.
Additional Info.
Product Description
Principle of the Incinerator equipment is incineration/combustion/burn. Generally, the function is waste treatment for Solid waste, Liquid waste, Gas waste, etc.
The main body is one combustion chamber (at least), Refractory line or firebrick, Insulation materials and the outer plate. Ignition element is external oil or gas burner. The burner can be running until waste burnout but for some waste like plastic, paper (sometime, mix coal with waste before feeding), they can combustion itself after Ignition. During combustion, burner has a fan itself for Oxygen supply and also incinerator pet, incinerator pet a400, incinerator pet cremation, incinerator pet cremation prices, incinerator photo, incinerator plc controller, protect burner avoid heat damage from combustion chamber. And, there a external fan blow air into combustion chamber. The Exhaust gas blow out after combustion.
Considering Environmental Protection requirements and rules, almost all incinerator have secondary combustion chamber (after-burn, post-combustion), even if third combustion chamber. The secondary burner burn the Exhaust gas from primary combustion chamber, this technology make sure sufficient combustion, few black smoke and smell.
The updated incinerator technology focus on Exhaust gas treatment to remove Hazardous material and other function from incinerator, like heat recovery (waste to energy), save fuel cost, PLC Automation operation.
In some Developed countries, some new waste treatment method like High-temperature cooking, waste carbonization, crushing sterilization technology is instead of incineration technology.
Items/Model | TS30(PLC) |
Burn Rate | 30 kg/hour |
Feed Capacity | 60kg |
Control Mode | PLC |
Combustion Chamber | 330L |
Internal Dimensions | 75x75x60cm |
Secondary Chamber | 180L |
Smoke Filter Chamber | Yes |
Feed Mode | Manual |
Voltage | 220V |
Power | 0.5Kw |
Oil Consumption (kg/hour) | 10.2–20 |
Gas Consumption (m3/hour) | 9.8–20 |
Temperature Monitor | Yes |
Temperature Protection | Yes |
Oil Tank | 100L |
Feed Door | 55x50cm |
Chimney | 5Meter |
Chimney Type | Stainless Steel |
1st. Chamber Temperature | 800 degree –1000 degree |
2nd. Chamber Temperature | 1000 degree –1200 degree |
Residency Time | 2.0 Sec. |
Gross Weight | 3000kg |
External Dimensions | 175x120x140cm |