incinerator manufacturers

GOODS: ONE INCINERATORS IN ACCORDANCE WITH THE			SUPPLIER’
REQUIREMENT			S	OWN
			PROPOSED
			PROPOSED
			SPECIFICA
			TION/
			CONFIRM
			ATION
			SPECS
	Height from base: 11m and if there are buildings within 30m of the
	incinerator, chimney must extend at least 3m above the apexes of all
	the roofs of such buildings
	Diameter of chimney at top: 430mm
	Weight of stack: ± 500kg
	case and stack be painted with 400 °C heat resistant black paint
	Burners
	1^st chamber 850 ^oC -900^oC
	2^nd chamber 1000^oC
	Variable speed combustion air blowers
	Primary chamber volume ±1.05 cubic metres
	Mixing chamber volume ±0.30 cubic meters
	Settling chamber volume ±0.89 cubic meters
	Weight excluding chimney ±6 400kg at manufacture
	Firing tools supplied: Hoe, poker and rake
	Dimensions
	Length ±2 125mm
	Width ±1 890mm
	Height ±2 125mm
	Extra width for burners	±1 000mm
	Loading door opening 610mm×540mm
	Hearth area ±1.19 square metres
	Description of grate/hearth: A full hearth to be supplied to prevent
	contaminated liquids from flowing into ash pit without being
	incinerated
	Compliance with South African Atmospheric Pollution Prevention
	Act No. 45 of 1965 or equivalent air pollution standard
	Documents to be supplied : Operations and maintenance manual and
	standard operating procedures (SOPs)
	Emission controls:
	heated refractory screen
	Low velocity grit settling chamber
	Stainless steel arrester screen
	Refractory material: alumina content ≥49% and thickness average
	102mm
	Bake out: to be done over 2-3 days
	Materials of construction
	Case: 5mm mild steel
	Bracing: heavy angle and channel
	Hearth: 1550 °C
	Ashing door: high grade cast iron
	Loading door 5mm mild steel lined with 1550 °C castable general
	purpose high strength, high abrasion resistant monolithic refractory
	concrete
		36