Month: October 2025

Total combustion converts waste into inert bottom ash with minimal development of smoke, fly ash and also harmful gases. Numerous aspects affect this procedure including the heating value, moisture as well as chemical composition of the waste itself, operating conditions in the shed chamber (i.e. temperature level, holding time and also turbulence) and also driver …

Basic Info. Export Markets:Global Additional Info. Trademark:clover Product Description Key Features:  * All models with Dual combustion chamber. *according to order  * Stainless Steel chimney/stack, long lifetime. *according to order  * High temperature, long lifetime of incinerator.  * Free or minimum installation on site.  * High burn rate, from 10kgs to 500kgs per hour, up …

Basic Info. Model NO.:MSW2000 Export Markets:Global Additional Info. Trademark:CLOVER Product Description Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, Animal Incineration, Pet …

* Burner with fuel, mono-bloc casting guiding type with horizontal flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve. * A secondary injection of air to ensure perfect oxygen content. 19.    A control box ensuring the complete cycle of combustion. 20.    Fan: * Electro-ventilator distributing the secondary …

HICLOVER incinerator exert the advantages and discard the disadvantages of the same kind of equipment at domestic and abroad. It is an unique and international advanced medical waste incineration equipment. The equipment is small size, high efficiency, reasonable process, leading technologies and a high harmless degree, ideal garbage treatment equipment for hospital, laboratory, hotel, station, etc. …

Containerized Incinerator with ISO Container｜Mobile Incinerator｜Whole Building Dispatch｜Up to 100kgs per hour Capacity  

Main as well as extra burners: Different electrically spark-ignited major heating units along with second heating systems with automatic control will certainly be used to accomplish the specified temperature level needs in the additionally added as well as major chambers. The fires of the main and also additional heating units will not strike the burner …

* medical incinerators, The insulation of the combustion chamber should be composed of refractory bricks, having a high content of aluminium and insulates bricks in order to assure a minimum temperature on the outside sheet metal. * Composition of the refractory; ?    Refractory concrete : ?    . Thickness    : ≥100 mm ?    . Nature: 42% …

Key Product List Primary Burning Chamber Additional Combustion Chamber Mix-Combustion Chamber Smoke Filter Chamber Incinerator Control Situation Smokeshaft:5.0 Meters *( upgrade to Stainless Steel, cost-free cost) Italy oil burner: 02 collections Oil Tank: 150Liters Mobile Trailer for Incinerator Model YD-50C Burning Rate (kgs/Hour) Average 20-50 kgs/hour Feed Capacity (kgs) Average 80 kgs/feeding Devices Weight 2500 …

The figure was revealed in the Alice Springs regional waste management facility report for October. The dead pet you asked the vet to dispose of will end up buried in landfill, in most places across the country, and Alice Springs is no different. “It’s a combination of horses, dogs, cats, pigs, any animal that dies,” …

medical waste diesel heater Burning Cost:47.5–– – – 50kg/hour. Minimum Operating Temperature level:850 o C( key combustion). Optimum Operating Temperature level:1450 oC( Afterburner chamber). Second Burning Capacity: Compulsory. Thickness Insulation:20 mm High. Refractory Casting: Minimum 65mm. Strong refracting lining to hold up against:1500 oC. Regular burn out time: optimum:3 humans resources. Fuel type: Diesel. Gas …

1.    Capacity of destruction in weight: 60 Kg/h. 2.    It should be able to operate not less than 10 hours/day 3.    This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc… 4.    Design Specification : Types A, B, C, D, and E of medical waste 5.    “PYROLYTIC” …

50 kg/  hour  capacity incinerators ·        Burning Rate: 50kos/hr ·        Feed Capacity:  150kqs ·        Primary  Combustion  Chamber:  900 liters ·        Secondary  Combustion  Chamber:  300 liters ·        Mix Combustion  Chamber:  Yes ·        Smoke Filter Chamber:  Yes ·        Feed Mode: Manual ·        Power: 0.7Kw ·        Fuel Type: Diesel Oil/ Natural Gas/LPG ·        Internal Dimensions:  120 x 90 …

INCINERATEUR DE DECHETS HOSPITALIER hospital incinerator design SPECIFICATIONS TECHNIQUES. Capacité destructive de 55 Kg/h jour de déchets hospitaliers  avec un p?.c. i jusqu’à 3.200 Kcal/Kg 1)Type de déchet hospitalier 2)Pouvoir calorifique inférieur                                                                        3.200 kcal/kg 3)Humidité                                                                                                          20% 4)Teneur  en cendres et/ou inertes                                                                       8% 5)Capacité destructive nominale                                                                         55 kg/h 6)Volume chambre de combustion                                                                     1,65 m3 7)Volume chambre …

Capacity 100 kg/hr of waste containing up to 85% moisture   ?      Two combustion chambers   Two fully automatic, oil fired, pressure jet burners   Panel board   Diesel tank of capacity 250 It. with 2 diesel pipelines, filter and valve.   The incinerator shall be ignited using light fuel oil and shall automatically switch …